Motion-primitives Based Planner for Fast & Agile Exploration
Repository Index
111,821 visible repositories in the index
913–936 of 1,398 · Most stars
C99 firmware core for a 16-series LFP pack. Independent charge and discharge FETs, cell protection, coulomb SOC, and the current and voltage limits an inverter follows. Passive balance runs for 1.0 s, then 200 ms off, so the fault wait finishes on an unloaded sample. No RTOS, no heap. The AFE driver and fieldbus stay on your board.
- battery
- bms
- c
- firmware
Real-time LIDAR-based Urban Road and Sidewalk detection for Autonomous Vehicles 🚗
- road-segmentation
- lidar
- point-cloud
- ros
A lightweight MicroPython GUI library for display drivers based on framebuf, allows input via pushbuttons. See also micropython-touch.
Web-GUI Embedded Multitool
- 3d-printing
- debug
- embedded
- interface
I2C serial bus access with Node.js
- i2c
- smbus
- raspberry-pi
- beaglebone
Use LiDAR to map the static world
- slam
- lidar
- lidar-point-cloud
- gps
A replica, near real-time, miniature UK railway station train departure sign based upon a Raspberry Pi Zero and 256x64 SPI OLED display
- raspberry-pi
- raspberrypi
- balenacloud
- balena
Sensor fusion calculating yaw, pitch and roll from the outputs of motion tracking devices
- micropython
- fusion
- sensor
A robust sensor fusion library for online localization.
- sensorfusion
- estimation-algorithm
- gnss
- ranging
A python 3 library to connect various motor systems to a Raspberry pi single board computer
- raspberry-pi
- motor
- servo
- 28byj-48
Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. Can be used for monitoring low speed CAN (interior can bus of most cars, less than 500kbps). For higher speeds serial port can become a bottleneck in case data density is high.
Python based library for talking to character based LCDs.
Raspberry Pi MQTT Monitor gathers system information and sends it to a MQTT server.
Human Interface Device (HID) over Bluetooth Low Energy (BLE) GATT library for MicroPython.
- hid
- keyboard
- mouse
- joystick
RVizWeb: RViz on the browser
piVCCU is a project to install the original Homematic CCU3 firmware inside a virtualized container (lxc) on ARM based single board computers.
- homematic
- raspberrypi
- raspbian
- hm-mod-rpi-pcb
Python parser for URDFs
- ros
- urdf-visualizer
- urdf-descriptions
- urdf-models
M-Film: film simulation for Canon EOS cameras with Magic Lantern. 72 film stocks (Portra, Velvia, Tri-X, CineStill…), a film-camera interface and an in-camera darkroom that develops your RAWs. 5D Mark III, 6D, 600D, 650D, 700D, EOS M and more.
- analog-photography
- camera-firmware
- canon
- canon-5d-mark-iv
The repository host gives no description.
A high-performance, general-purpose toolkit for versatile robotic tasks.
- inverse-kinematics
- model-predictive-control
- motion-planning
- optimization
Compilation of autoexec scripts and mods for Xiaomi Yi camera after reverse engineering of firmware.
- reverse-engineering
- xiaomi
- xiaomi-firmware
- xiaomi-camera
SuperMimic-UniLab: An Independent reproduction of SuperMimic on UniLab for whole-body humanoid motion tracking.
- amd
- motrixsim
- mujoco
- rocm
Kotlin Multiplatform MQTT client & embeddable and standalone broker
- kotlin
- kotlin-multiplatform
- mqtt
- mqtt-broker