📡 RasComm is a communication device that translates plain text into Morse code (IMC) visually or audibly.
- raspberry-pi-3
- morse-code
- morse-translator
- audio
Repository Index
47,133 repositories indexed
145–168 of 180 · Most stars
This is an extension for the MagicMirror² (https://github.com/MichMich/MagicMirror). It provides the ability to subscribe to MQTT topics and display them.
A simple service which consumes, transforms and periodically republish json messages on mqtt.
- hacktoberfest
- hacktoberfest2021
- mqtt
Run speedtest-cli and publish results via MQTT
NNStreamer extension plugins for ROS support
Library for sending data to thingspeak.com from IoT devices running micropython (such as ESP8266)
- thingspeak
- micropython
- micropython-thingspeak
- iot-device
A Twitter adapter for the Lita chat robot.
MQTT bridge for Huawei solar inverters (SUN2000/3000/5000) → Home Assistant
A Micropython module for communicating with the Bosch BME280 temperature, humidity, and pressure sensor.
Micropython code to control relays, temp sensors, buttons, touchscreen, gps etc. Has web ui, mqtt, home assistant and thingsboard support
MicroPython Driver for the Bosch BMP585, BMP581, BMP390, BMP280, and BME280 pressure sensors
Numpy .npy file support for MicroPython - read/write/streaming
A systemVerilog implementation of Game Boy on DE1-SoC
Micropython driver for Sure Electronics' HT1632C bicolor led matrix
A reimplementation of the FIRST Robotics WPILib libraries in Scala for Scala Native support
Driver to digital sensor of Temperature, Pressure and Humidaty
A Idobata adapter for the Lita chat robot.
atwSCADA — Free SCADA Software in a Single HTML File | IEC 61850, OPC UA, Modbus TCP | 53 Function Blocks, 65 Graphic Elements | No Installation | Download Free Demo
- digital-substation
- hmi
- iec61850
- industrial-automation
This is a micropython module / class to measure data from the htu21d
This project demonstrates how to interface the SHT11 sensor with a MicroPython-compatible ESP32 board (e.g., Lolin32 Lite) to measure temperature and relative humidity. It uses bit-banged communication and is written fully in MicroPython.
- micropython
- sht1x
- sht11
- sensor
Micropython Generic Thermistor Library is a basic software module designed to simplify temperature sensing using NTC thermistors within MicroPython-based projects. The library assumes a generic NTC thermistor on the ground side of a voltage divider.
Publish Measurements from B-Control Energy Manager Smart Meters on MQTT :electric_plug: :chart_with_upwards_trend:
- smartmeter
- energy
- power
- mqtt
Cheap tally lights which support TSL 3.1 and 5.0 protocol. Software can be replaced by any other which works on WeMos D1 Mini. For example vTally.
A micropython implimentation of the driver for an MS5803 pressure & temperature sensor